The Frosted Flat Cup 500 ml is Wingoh's signature 17 oz matte cup — 15.1 g of food-grade PP shaped on a 135 mm flat rim that fits standard 90 mm cup-sealer dies on the offset profile. The frosted natural body diffuses light evenly over layered drinks, which is why it sits in most of the milk-tea accounts we serve across APAC.
Specifications
| Attribute | Value |
|---|
| Type | Thinwall cup, injection |
| Material | PP food-grade |
| Color | Frosted Natural (matte) |
| Capacity | 500 ml (17 oz) |
| Weight | 15.1 g (±0.2 g) |
| Top diameter × Height | 135 × 90 mm |
| Pack | 25 pcs |
| Carton | 500 pcs (20 packs) |
| Carton size | 48 × 40 × 35 cm |
Best for
- Specialty milk-tea chains running 16–17 oz default sizes where layered presentation (boba, jelly, foam) shows cleaner through frosted PP than through glass-like PET.
- APAC catering operators packing iced coffee on event mornings — the matte wall masks the inevitable fingerprint smudge across batch service.
- Dessert-takeaway counters doing parfait and panna cotta where the frosted finish gives a "patisserie" cue compared to transparent commodity cups.
Material rationale
The 15.1 g wall is calibrated for film-seal tension at the 135 mm offset — 1.5 g heavier than the same 500 ml mouth would need for a snap lid, because the rim has to resist deformation during sealer down-stroke. PP food-grade holds at 100 °C continuous, so a hot tea pour-up before icing doesn't soften the wall. Frost is in-resin (not a sprayed coating), so the cup survives -18 °C freezer pulls for dessert programmes without finish degradation.
Ordering details
- MOQ: 1 carton (500 pcs)
- Lead time: 14–21 days for stock colour, 30–45 days for custom in-mould label
- Sample run: free sample shipped to verified B2B buyers; pad-print MOQ 50 cartons
Compare with the Frosted Flat Cup 400 ml for a smaller standard size, or the Frosted Solid Color Cup 500 ml for matte red/yellow/orange. See the full thinwall-cups category for lid pairings and capacity ladder.